The library for your next cutting project
Saved projects (0)
Home / Materials & supplies

Materials and supplies for your laser projects

Metal first: a diode or CO2 laser can mark anodized aluminium or sprayed steel. Then choose the wood, acrylic and small parts your file is drawn for.

Sponsored links. Your purchase helps keep FreeLaserFile free. As an Amazon Associate we earn from qualifying purchases.

Mark metal with the laser you already own

Example of a laser-engraved metal card

Anodized aluminum sheets

Marks dark and crisp on diode and CO2 lasers at low power — this is engraving, not cutting. Cutting sheet metal needs a fiber laser.

View on Amazon
Example of a laser-marked metal card

Metal marking spray (Cermark/Thermark)

Sprayed on bare steel or stainless, it lets a standard CO2 or diode laser mark the metal without a fiber laser.

View on Amazon
Example of a machine-engraved metal pendant

Blank metal tags and pendants

Stainless or brass tags take a permanent mark. A fiber laser marks bare metal; with a diode or CO2 laser, apply marking spray first.

View on Amazon

Wood, acrylic and finishing parts

Merry Christmas Bauble Ornament, cut in plywood

3mm basswood plywood sheets

The default stock for most of these files — cuts cleanly on diode and CO2 lasers.

View on Amazon
Festive Christmas Tree Cutout Earrings

Earring hooks and jump rings

Findings to turn cut pieces into wearable earrings.

View on Amazon
Celtic Knot Roman Numeral Wall Clock

Quartz clock movement kit

Mechanism and hands to finish a cut clock face. Check the shaft length matches your material.

View on Amazon
Roll of beige masking tape on a workbench

Laser transfer tape

Masks the surface so smoke marks peel off with the tape instead of staining the wood.

View on Amazon
Home Sweet Home Honeycomb Round Door Hanger

Round door-hanger blanks

Pre-cut round or honeycomb shapes save a first cut. Engrave them, then add a cord to hang.

View on Amazon
laser-cut wooden mandala earrings

Mandala earring blanks

Thin shapes ready to engrave, with holes for hooks. Fit them with the rings and hooks above.

View on Amazon
Tropical Monstera Leaf Wall Art

Monstera leaf wall-art blanks

Multi-piece leaves to layer. Cut two colours and glue them for a raised finish.

View on Amazon

Which material for which project?

Signs and door hangers3 mm plywood for a natural finish, cast acrylic for colour and a polished edge.
Earrings and small piecesThin plywood or acrylic, plus hooks and jump rings to finish.
Clock faces3 mm plywood and a quartz movement. Check the shaft length matches your material.
Clean edgesTransfer tape keeps smoke marks off the surface. Always run a test cut on a scrap first.
Marking metalAnodized aluminum or a marking spray on bare steel works with the diode or CO2 laser you already have. Actually cutting sheet metal needs a fiber laser — see our plasma/CNC gear on the doors & gates category.

Check your manufacturer’s approved materials and ventilation requirements before cutting. This page does not certify compatibility.

Example photos of engraved metal: MetalCreditCards, MetalCreditCards, CGJewelry — Wikimedia Commons, CC BY-SA 4.0 (images resized for this page).

Need a laser first?

See the machines our files work with.

See machines