← Back to Blog

Free Laser Cut Files for Sculpfun — DXF & SVG for S9, S10, S30

•8 min read
Free laser cut files for Sculpfun S9 S10 S30 DXF SVG

Sculpfun has built a strong reputation in the diode laser market for delivering capable, affordable machines that punch above their price point. The S9, S10, and S30 are among the most popular beginner and intermediate diode lasers on the market, and all three can produce impressive results when fed the right files and operated with the right settings. This guide covers what each Sculpfun model can do, recommends the best starting materials and settings, explains how to import DXF files in LightBurn, and points you to the best free file categories to start with on your Sculpfun machine.

Sculpfun Model Comparison: S9, S10, S30

All three machines are open-frame diode lasers with similar build quality and expandable work areas. The key differences are laser module power, beam quality, and air assist capability.

ModelOptical PowerBeam SizeAir AssistMax Wood Cut
S95.5W optical0.08 × 0.06 mmNo (add-on available)~8–10 mm (multi-pass)
S1010W optical0.06 × 0.06 mmNo (add-on available)~10–15 mm (multi-pass)
S3033W optical0.05 × 0.05 mmBuilt-in~25 mm (multi-pass)

All models support DXF and SVG file import via LightBurn. Work area is 410 × 420 mm on standard models, expandable with add-on Y-axis extensions.

Which Model is Right for You?

The S9 is the entry-level choice, best for engraving on wood and leather and for cutting thin materials up to 3 mm plywood. It is ideal for beginners who want to learn laser cutting without a large upfront investment.

The S10 is the most popular Sculpfun model for a reason: 10W of optical power is enough to cut 3–5 mm plywood cleanly in a single pass (with air assist) and handle most craft cutting projects. The square beam spot gives it excellent engraving resolution for photo engraving and fine detail work.

The S30 is Sculpfun’s high-power diode offering. With 33W of optical power and a built-in air assist pump, it can cut materials that would require multiple slow passes on the S10. The S30 is the right choice if you plan to cut thick plywood regularly or want to run the machine in a production environment.

Recommended Settings per Material

Diode laser settings vary significantly by machine condition, focus accuracy, and material batch. Use these as starting points and adjust based on a small test cut.

Sculpfun S10 Settings (10W optical)

MaterialSpeed (mm/s)Power (%)Passes
3 mm birch plywood — cut200100%2–3
5 mm birch plywood — cut120100%4–5
3 mm MDF — cut180100%2–3
Leather 2 mm — cut30080%1
Birch plywood — engrave300055–70%1

Add air assist (even a simple aquarium pump) to significantly reduce passes needed on the S9 and S10. Air clears char from the kerf, allowing the laser to cut deeper on subsequent passes.

How to Import DXF Files in LightBurn for Sculpfun

All Sculpfun machines are fully compatible with LightBurn via a GRBL connection. Here is the fastest workflow for getting a DXF file from FreeLaserFile onto your Sculpfun machine:

  • Connect your Sculpfun: Open LightBurn and add your machine via “Devices” → “Create Manually” → GRBL. Set the work area to 410 × 420 mm (or your actual bed size if extended). Leave the origin at front-left unless you have specifically changed it on the machine.
  • Import the DXF: Use File → Import (or drag the DXF file directly into the LightBurn canvas). The file opens at its native dimensions. Check the scale — some DXF files from older CAD software import in inches rather than millimeters. If the design looks huge on screen, select all and check the dimensions panel. If needed, delete, re-import, and use the DXF import dialog to set units to millimeters.
  • Assign layers: In LightBurn, each color layer represents an operation. Assign cut lines to a “Line” layer and engraving areas to a “Fill” layer. Cut lines should be run last (run engrave before cut to avoid the material shifting after cuts release pieces).
  • Set the origin and frame: Place your material on the bed, set the laser head to the starting corner that matches your LightBurn origin setting, and use the “Frame” button to trace the outer bounds of your design without firing. Confirm the design fits your material before cutting.
  • Run a test cut: Before cutting the full design, cut a small square test at your chosen settings. If the test passes cleanly through the material, proceed with the full file. Adjust speed or passes if needed.

Best File Categories for Sculpfun Machines

Sculpfun machines are diode lasers and have different material strengths than CO2 lasers. They excel at:

  • Wood engraving — diode lasers produce exceptional photo engraving results on birch plywood and basswood. Detailed portrait engravings and intricate pattern engraving at high resolution (0.1 mm line interval) are a Sculpfun strength.
  • Thin wood cutting — 3 mm birch plywood and basswood are the sweet spot for Sculpfun cutting. Most free DXF files on FreeLaserFile are designed for exactly this material and thickness.
  • Leather cutting — diode lasers cut vegetable-tanned leather cleanly with a slightly darker edge than CO2. Keychains, earrings, and small accessories are ideal Sculpfun leather projects.
  • Slate and stone engraving — diode lasers can engrave coated slate, anodized aluminum, and dark stone. The S10 and S30 produce sharp, high-contrast results on these materials at moderate speeds.

Note that Sculpfun diode lasers cannot cut clear or transparent acrylic — the blue-violet diode beam passes straight through without being absorbed. Use opaque or dark-colored acrylic only, or switch to a CO2 laser for acrylic work.

Tips for Getting the Most from Your Sculpfun

  • Focus is critical. Diode lasers are sensitive to focus distance. Use the included focus block or measure the distance from the laser module to the material surface precisely. Even 1 mm of defocus noticeably reduces cutting power and engraving resolution.
  • Add an air assist even on the S9 and S10. A basic aquarium air pump with a nozzle pointed at the cut zone costs under $10 and reduces the number of passes needed on 3 mm plywood by 30–50%.
  • Use honeycomb or elevated bed. Elevating your material on a honeycomb grid or small standoffs prevents flashback (the laser reflecting off the base and scorching the underside of your material) and allows smoke to exhaust more freely from the underside of the cut.
  • Clean the lens regularly. Smoke residue builds up on the laser module lens and reduces power over time. Clean with a cotton swab dipped in isopropyl alcohol every 10–15 hours of cutting time.

Download Free Files for Your Sculpfun

FreeLaserFile hosts hundreds of free DXF and SVG files that work perfectly on Sculpfun machines. Browse wood laser cut files, keychains, home decor, signs, and seasonal designs — all optimized for 3 mm birch plywood and compatible with LightBurn. Or browse all free designs to find your next Sculpfun project.

Download Free Sculpfun-Compatible Files

Browse our library of free DXF and SVG files tested and optimized for Sculpfun S9, S10, and S30 laser cutters. Wood projects, keychains, signs, home decor, and more.