← Back to Blog

LightBurn Settings for Beginners — Speed, Power & DXF Import Guide

•11 min read

LightBurn is the de facto standard software for CO2 and diode laser cutters. It replaces the clunky manufacturer bundles that ship with most machines and gives you a professional-grade interface with real path optimisation, multi-layer colour control, and direct DXF import. If you have just bought a laser cutter — xTool, Ortur, Sculpfun, K40, OMTech, or any GRBL or Ruida machine — this guide gets you from zero to first successful cut, with a reference speed/power table you can bookmark.

The LightBurn Interface at a Glance

When you open LightBurn for the first time the layout can feel overwhelming. Here is what each panel does:

  • Workspace (centre) — the blue rectangle represents your laser bed. This is where you arrange your designs. Drag files here or use File → Import.
  • Cuts / Layers panel (bottom-right) — every colour in your design becomes a separate layer here. Each layer has independent speed, power, passes, and mode (line/fill/offset fill) settings. This is the most important panel.
  • Console (bottom-left) — raw GRBL or DSP output. Useful for debugging connection issues. Ignore it until something goes wrong.
  • Laser panel (right side) — Start, Stop, Frame, and the Start from Here button. "Frame" traces the bounding box of your design without firing the laser — use this to confirm material placement before every cut.
  • Tool bar (left) — selection, node editing, shape tools, text tool. For most DXF imports you only need the selection and node tools.

Connecting Your Laser to LightBurn

On first launch, LightBurn prompts you to add a device. Select your controller type:

  • GRBL — most diode lasers (xTool D1 Pro, Ortur, Sculpfun, Atomstack). Connect via USB, select the correct COM port, set working area to match your machine.
  • Ruida — most Chinese CO2 lasers (OMTech, Boss Laser, Thunder Laser, K40 with Ruida upgrade). Connect via USB or Ethernet.
  • BOSS / xTool — some xTool P2 units use a proprietary controller; select xTool in the device wizard.

After adding the device, click the small lightning bolt icon next to the device name in the Laser panel to test the connection. The console should show "ok" responses if GRBL, or status bytes if Ruida.

How to Import DXF Files in LightBurn

LightBurn handles DXF files better than almost any other laser software. Here is the exact process:

  1. Download a DXF file from FreeLaserFile. Files come as a ZIP — extract before importing.
  2. In LightBurn, go to File → Import (or drag the DXF directly onto the workspace). LightBurn will automatically open the DXF import dialogue.
  3. Set the DXF unit. Most DXF files from professional sources use millimetres. If your design imports at the wrong scale, change the unit in the import dialogue (mm, inches, or unitless/auto-detect).
  4. Check for open paths after import. Go to Edit → Select Open Shapes. If any paths are highlighted, use Edit → Close Selected Paths to seal gaps. Open paths produce partial cuts.
  5. Remove duplicate lines. Go to Edit → Delete Duplicates. Overlapping lines cause the laser to trace the same path twice, scorching the material and wasting time.
  6. Assign layers. Select parts of the design and assign them different colours in the Cuts / Layers panel if you want separate operations (e.g., engrave text on one layer, cut outline on another).

Speed and Power Settings — Reference Table

These are starting point settings. Every machine is different — lens focus, tube age, and ambient temperature all affect results. Always run a test cut on scrap before cutting your full design.

MaterialThickness40 W CO2 — Cut60 W CO2 — CutEngrave
Baltic Birch Plywood3 mm10 mm/s @ 75%15 mm/s @ 65%300 mm/s @ 20%
Baltic Birch Plywood6 mm5 mm/s @ 85% (2 pass)8 mm/s @ 80%300 mm/s @ 25%
MDF3 mm12 mm/s @ 70%18 mm/s @ 60%350 mm/s @ 18%
Cast Acrylic3 mm8 mm/s @ 70%12 mm/s @ 60%400 mm/s @ 15%
Cast Acrylic6 mm4 mm/s @ 80%7 mm/s @ 75%400 mm/s @ 20%
Leather (veg tan)2–3 mm20 mm/s @ 55%30 mm/s @ 45%500 mm/s @ 12%
Cardboard3–5 mm30 mm/s @ 50%40 mm/s @ 40%500 mm/s @ 10%
Slate / Tile (engrave only)N/AN/A (no cut)N/A (no cut)200 mm/s @ 70%

* All speeds in mm/s. Power as percentage of rated tube power. Settings vary significantly between machines — always test on scrap first.

Essential LightBurn Settings to Configure Once

Cut Optimisation

Go to Edit → Cut Optimiser Settings. Enable "Reduce Travel Moves" and "Cut Inner Shapes First". The first reduces head travel time (faster jobs). The second cuts internal geometry before outer geometry — if you cut the outside first, the piece falls before the inner cuts are complete.

Start Speed and End Speed (Ruida Only)

Ruida controllers have separate "Start Speed" and "Run Speed" settings. The laser head accelerates from Start Speed up to Run Speed. For fine detail like mandala spokes, set Start Speed to 10 mm/s or higher so the machine does not overfire at corners where it slows down.

Air Assist

If your machine has a controlled air assist (not just passive airflow), enable it in the layer settings for every cut operation. Disable it for engraving — air blast can push ash back onto engraved surfaces and reduce contrast.

Z Offset

LightBurn can automatically move the laser head to a specific Z height before cutting if your machine has Z-axis control. Set the Z offset to match your focal length (marked on your lens, typically 38.1 mm or 50.8 mm for CO2 machines). Correct focus is the single biggest quality factor — more than any speed or power setting.

LightBurn Tips That Save Hours

  • Use the Material Library. After dialling in settings for a material, save them via Window → Material Library. Name them by material, thickness, and date. Next session, load them in one click.
  • Frame before every cut. The Frame button moves the head around the bounding box of your design without firing. It takes 10 seconds and confirms your material is aligned before you commit.
  • Use "Output" toggle per layer. Each layer in the Cuts / Layers panel has an Output checkbox. Uncheck it to skip that layer in the next run — useful for running only the engrave pass after you have already cut the outline.
  • Set overscanning on engrave layers. Overscan tells the head to continue past the edge of the engrave area before decelerating. Without it, the edges of fill engraves appear darker. Set overscan to 2.5% for most engrave speeds.
  • Lock the design to the origin. Use Edit → Lock Position to prevent accidental dragging of an aligned design between runs.

Your First Project: A DXF File from FreeLaserFile

For a first project, pick a simple silhouette or geometric file — a mandala or animal outline in the 100–150 mm range. Download the DXF from FreeLaserFile, import it as described above, and cut on a piece of 3 mm plywood using the table settings as a starting point. The whole process — download, import, settings, frame, cut — takes under 10 minutes. Once you have that first clean cut in hand, the confidence and understanding of the workflow builds rapidly.

Find Your First LightBurn Project

Download a free DXF file, import it in LightBurn, and cut your first project today. No account needed.